Option
the grouping function can combine many unlocking combinations.
System ability to define total 5 groups: group 1, group 2, group 3,
group 4 and group 5. New registered user by default belongs to
group 1, and first uses time period of group, but the user can be
allocated into other group, selected serial number of Time period
already being set in group Time group Time, after user resets the
belonged group, the user uses default time period of correlative
group. So default time period of each group should be defined first.
Note: time period of system defaults that group 1 selects serial
number “1” of time period. (E.g. new registered user default
can unlock door)
The setting procedure of Access Group is follow.
1) Enter “GRP 1 TZ Define “ and screen displays as follows:：
2) Press OK to enter.
3) There are 3 time periods in GRP TZ Define. Relationships
among these 3 time periods are “OR”.
GRP TZ Define ▲
Group No
1
ESC OK
To Next Page
Loading...
