3
SPECIFICATIONS
INSTALLATION
236ECEM1 236ECEM2 236ECEM3
Groups 1 2 3
Boiler Capacity 6 Qt. 13 Qt. 19 Qt.
Voltage 110–120V 220–240V 220–240V
Waage 2000W 4700W 6500W
Weight 97 Lb. 141 Lb. 179 Lb.
Recommended
circuit amperage
20A 30A 50A
Dimensions (in.)
(WxDxH)
19½" x 21" x 22¾" 27½" x 21" x 22¾" 37" x 21" x 22¾"
Every machine has an identification label placed on the front of the machine.
The label includes information of model number, voltage, serial number, wattage, and
its certificate. Please do not remove this label in order for technician to check electrical
information in the future.
• A cold water connection is required for this unit to function properly.
• Contact a qualified technician to ensure that your electrical and water setup are
correct to the specifications of the machine.
• This machine comes hardwired (no plug) and a qualified electrician is required for
installation.
• A technician is also required to connect to the existing waterline and check the
filtration system before starting. Operating with poor water conditions can void the
warranty as mentioned in the last page of this manual.
• Use an independent breaker for this machine which conforms to safety regulations.
• Total Dissolved Solids: Minimum 50 PPM, Maximum 125 PPM
• Total Hardness: Minimum 3 GPG, Maximum 5 GPG
• pH: 6.5~7.5
• Free Chlorine: Maximum 0.5 PPM
• Total Chlorine: Maximum 0.5 PPM
To Next Page
Loading...
Need help?
General
