Need help?Do you have a question about the Estun ProNet-50D and is the answer not in the manual?
General| Brand | Estun |
|---|---|
| Model | ProNet-50D |
| Category | Servo Drives |
| Language | English |
Manual describes information for designing and maintaining ProNet Plus Series AC servo drives, including specifications, installation, wiring, operation, panel operator, protocols, and ratings.
Detailed instructions for wiring the main circuit, I/O signals, and encoders for ProNet series servo drives.
Cautions and instructions for main circuit wiring, including cable separation and terminal functions.
Details the input and output signals for ProNet MG and EG-EC servo drives, including their pin numbers and functions.
Instructions and precautions for wiring to minimize noise interference in servo drive systems.
Covers trial operation procedures for servomotors, including without load, with host reference, and combined machine operation.
Covers the process of trial operation for servomotors, including initial checks and different operational modes.
Configuration of essential functions for servomotor operation, including Servo ON, rotation direction, and overtravel limits.
Operational guide for speed control using analog voltage reference, covering parameter settings and input signals.
Guide to operating in position control mode using pulse trains, covering basic settings and functions.
Operational guide for torque control using analog voltage reference, covering parameter settings and input signals.
Methods for limiting output torque to protect the machine, including internal, external, and analog voltage limiting.
Procedures for online autotuning to optimize servo gains for load rigidity and performance.
Describes how to use utility functions for adjusting servo drive and servomotor parameters.
To Next Page