Floor nozzle, parquet nozzle, brush
After any vacuuming it is recommended to check visually the brushes or collectors
for possible impurities. If there are some impurities, remove them.
VI. TROUBLESHOOTING
Problem Cause Solution
Motor won‘t start
Power supply not
connected
Check the cord, plug and the
socket
button is not switched on
Push button
Lid cannot be closed -
safety lock activated
Dust filter inserted
incorrectly in the holder
Check / repair fastening of the
cardboard front in the holder
Suction output is not
sufficient
Regulation in MIN position Set regulation to MAX.
Open suction Close the hole in the hose handle
Dust filter full Replace the filter
Clogged micro-filters Clean or replace the micro-filters
Nozzle/ suction hose/tube
or accessories is clogged
Remove blocking objects
The cable cannot be
wound in the entire
length
Twisted cable
Straighten the cable. Take out
about 50 cm of the cable and push
again button
VII. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be taken
over free of charge. Suitable disposal of the product can help to maintain valuable natural
resources and to prevent possible negative impacts on the environment and human health,
which could be the possible consequences of improper waste disposal. Ask for more details
at the local authority or at the local waste collection site. Fines can be imposed for improper
disposal of this type of waste in agreement with the national regulations. If the appliance
is to be put out of operation, we recommend its cutoff after disconnecting it from power
supply and in this way it will not be possible to use the appliance again.
Replacement of parts that require intervention in the electric part of the appliance
must be carried out by a specialized service! Failure to comply with the instructions
of the manufacturer will lead to expiration of the right to guarantee repair!
GB
25 / 48
To Next Page
Loading...
Need help?
General
