eta ePE-K - Tasks; Regular Ly Cleaning Annually; At Least; Every 3

12 www.eta.co.at
Maintenance table Cleaning and maintenance
Check the vacuum sensor
• Clean the silicon hose and connection for the vacuum
sensor
• Calibrate the vacuum sensor
X Specialist
Check the de-ashing system X Specialist
Clean the temperature sensor X Specialist
Clean the lambda probe X Specialist
Check the boiler doors X Specialist
Check the pellet hopper
• Check the stoker drive chains
• Check the clearance/gap of the position sensor for the
stoker screw
• Clean the fill level sensor
• Clean the strainer
X Specialist
Calibrate the lambda probe X Specialist
Reset the maintenance counter X Specialist
Perform a heating test X Specialist
Tasks
Regular
ly
Cleaning
annually
Maintenan
ce
at least
every 3
years
to be
performed by