EN - 51
EN
7.7 MOP EXTENSION CLEANING
1. Remove the mop attachment F from the container B.
2. Remove the F1 mop from the mop attachment.
3. Rinse the tank with water. Rinse mop F1 in flowing water.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by a professional service!
8. PROBLEMS SOLUTIONS
Problem Solution
The device cannot be
switched on
Low battery. Place the device in the charging dock and
recharge.
Ambient temperature lower than 0 °C or higher than 40 °C.
Working temperature of the device is 0-40 °C.
The device cannot be
charged
Remove the device from the charging dock and check
correct connection of the cleaning dock to the electric mains.
Check and clean charging contacts (on the device and the
charging dock).
The device cannot find its
charging dock
The device is too far from the charging dock, move it nearer
to the charging dock. Do not relocate the charging dock
during cleaning operation of the device.
Abnormal behaviour of
the machine
Restart the device.
Abnormal sounds are
generated
Wheels and the brushes are clogged. Clean where
necessary.
To Next Page
Loading...
