ETC PARADIGM - Wireless Access Station Overview

ETC Setup and Connect Guide
Paradigm
®
Touchscreen Interface
Paradigm Touchscreen Interface Setup and Connect Guide Page 9 of 12 Electronic Theatre Controls, Inc.
Copy or Move a File
Step 1: To copy or move a file between connected removable media and the Paradigm
®
Touchscreen Interface, touch to select the file from the list then touch the desired action.
• When copying or moving from the P-TSI to removable media, select the [Copy>] or
[Move>>] button.
• When copying or moving from removable media to the P-TSI, select the [<Copy] or
[<<Move] button.
Step 2: Touch [Done] to close the File Manager.
New Folder
Create a new folder on either the P-TSI or the removable media using the related [New Folder] button
beneath each section.
Step 1: Touch the [New Folder] button beneath the desired directory. An alphanumeric keypad
displays for naming of the new folder.
Step 2: Use the keypad to specify the new folder name.
Step 3: Touch the [Enter] button when done. The new folder displays in the directory.
Step 4: Touch [Done] to close the File Manager.
Delete
Delete a folder or file from either the P-TSI or the removable media using the related [Delete] button
beneath each section.
Step 1: Select the desired folder or file from the directory.
Step 2: Touch the [Delete] button beneath the related directory. Confirmation is required before
the file is deleted.
Step 3: Touch [Yes] to delete the selected file or [No] to cancel.
Step 4: Touch [Done] to close the File Manager.
[Device Manager]
Selecting the [Device Manager] button displays the Windows® Device Manager for access to
administrator hardware and driver support.