Etec DVA286 - Advanced Settings; Time; Zoom; Program

To Next Page

To Previous Page

ADVANCED SETTINGS

IMPORTANT NOTE:

THE FOLLOWING FUNCTION DESCRIPTIONS ARE FOR DVD DISCS ONLY. OPERATION AND

DISPLAY ON THE TV SCREEN MAY BE DIFFERENT FOR OTHER DISC FORMATS.

TIME

Press the TIME button to set the correct time. Use the NAVIGATION LEFT/RIGHT buttons to

scroll through the different time settings then press ENTER/PLAY button to confirm your

selection.

ZOOM

Press this button to zoom into a picture. Each time the button is pressed, the magnification level

will increase. After maximum ZOOM level is reached, image view will return to normal size.

PROGRAM

When playing discs, press the PROGRAM button to enter the programming function. Use the

NUMBER buttons to input the chapter/track numbers or use the NAVIGATION buttons and move

the cursor to the chapter/track numbers you want and press PROGRAM to confirm each

selection. Press the “ENTER/PLAY” button to start programmed playback. If you want to cancel

this function, press “STOP”.

SUBTITLE

(Note: Disc must be encoded with the Subtitle capability)

Press this button and the screen will display the language subtitle options encoded on the disc.

TITLE

(Note: Disc must be encoded with the Title capability)

Press the TITLE button to display the title menu. Press the NUMBER buttons to select the

chapter you want to view.

(Note: Disc must be encoded with the Root Menu capability)

Press the MENU button to display the root menu of the DVD. Select the menu item you desire

using the NAVIGATION buttons and press the PLAY button to access.

ANGLE

(Note: Disc must be encoded with ANGLE capability)

Press the ANGLE button to view action from different angles.

N/P

Press the key will switch between NTSC, PAL and AUTO.