AM/FM RADIO OPERATION
1. AM/FM RADIO
The built-on memory can hold up to 40 pre-set radio stations (20 FM & 20 AM). This will allow
you to simply select the assigned station memory number to immediately switch to any of the
preset stations.
2. AUTOMATIC PRESET TUNING & SELECTION
The radio stations in your area can be automatically scanned and saved in the preset station
memory.
2.1: Repeatedly press the “STOP/FM/AM” button to select “AM” or “FM” frequencies.
2.2: Press the “AUTO SEARCH” button to begin scanning the selected band and automatically
saving the found stations into the preset station memory.
3. MANUAL PRESET TUNING & SELCTION
The radio stations in your area can be manually selected and saved in the preset station
memory.
3.1: Repeatedly press the “STOP/FM/AM” button to select “AM” or “FM” bands
3.2: Press the 0 to 10 the number keys to enter the station frequency number and then press
the ENTER button to store your selection.
Tip:To improve radio reception,please adjust the antenna or the annex to the external antenna
market.
4. LISTENING TO THE RADIO
To listen to the radio, choose either a preset station from memory, or enter the desired station
frequency number manually.
5. PRESET MEMORY TUNING
Selecting a station from preset memoryequipment.
6.1: Repeatedly press the “STOP/FM/AM” button to select the “FM”or“AM” bands.
6.2: Repeatedly press the “CH+”or“CH-” buttons to scroll through and select the preset radio
station to listen to.
To Next Page
Loading...