What does code 'G' mean on my ETNA AKI480ZT downdraft display?
If code 'G' is displayed (alternately with the selected power) on the ETNA hob downdraft, it means the grease filter has been operating for 30 hours. Clean the grease filter and use the downdraft clean function.
What does code 'S' mean on my ETNA AKI480ZT Hob downdraft display?
If code 'S' is displayed (alternately with the selected power) on the ETNA hob downdraft, it indicates the odor filter has been operating for 120 hours. Replace the odor filter and use the downdraft clean function.
What does error code U400 mean on my ETNA Hob?
If the ETNA hob shows error code 'U400' and/or a continuous beep, it indicates that the appliance has been connected incorrectly or the mains voltage is too high. You should have your connection changed.
Why is there a flashing 8 on my ETNA AKI480ZT Hob downdraft display?
If you see a flashing '8' on the ETNA hob downdraft display, it means there are excess liquids inside the downdraft interior. Dry and clean the downdraft interior.
This manual describes how to best use the induction hob, including background information and tips.
Diagram showing the induction hob with numbered cooking zones, downdraft inlet grid, and control panels.
Detailed illustration of the control panel with numbered keys and their functions for hob and downdraft.
Hob sensor monitors temperature to prevent overheating and automatically switches off the zone.
Safety feature that limits cooking time based on power level to prevent forgetting to switch off.
Guidance on selecting cooking oils based on their smoke points for healthier frying.
Explanation of normal noises like ticking, pan sounds, and fan operation.
Criteria for selecting suitable pans, including base thickness, flatness, and material suitability.
Specifies the minimum required pan diameter for each cooking zone to function correctly.
Guide on selecting and using power levels 1-9 and the Boost function.
Explanation of the boost function for rapid heating and its time limitations.
Details on how the hob detects pans and what happens if no suitable pan is placed.
Instructions on setting a cooking timer or alarm for up to 99 minutes.
Explanation of various symbols and codes displayed on the hob for cooking zones.
Summary of key functions like Timer, Lock, and Downdraft with associated controls.
Recommended power levels for various cooking tasks and food types.
Tips for optimal fume extraction by angling pan lids towards the extraction side.
Step-by-step guide to turning on/off the hob and selecting cooking zones.
How to change the heat level for a cooking zone using the +/- keys.
Procedure to stop a single cooking zone or the entire hob.
Guide on how to set and adjust cooking timers or alarms for specific zones.
Instructions for activating and deactivating the child lock feature to prevent unintended changes.
How to operate the downdraft fan, including selecting speeds and modes.
Details on filter reset keys, timer, and boost key for the downdraft fan.
Guidance on cleaning the glass surface, including daily care and stain removal.
Information on grease filter indicator, cleaning the filter, and resetting the indicator.
Explanation of the odor filter indicator and maintenance requirements for recirculation mode.
Advice for common issues like cracked glass and initial setup routines.
A table listing symptoms, possible causes, and solutions for common operational problems.
List of error codes displayed on the hob, their meanings, causes, and solutions.
Technical data and measurements of the AKI480ZT model according to EU regulation 66/2014.
Information on the responsible disposal of the appliance and its packaging at the end of its lifecycle.
To Next Page
General
