What to do if my ETNA KI2160RVS Hob is not working and the display is blank?
If your ETNA hob isn't working and the display is blank, it indicates a lack of power supply due to a defective cable or faulty connection. You should check the fuses or the electric switch if there is no plug.
Why does a fuse blow as soon as my ETNA KI2160RVS is switched on?
If a fuse blows as soon as the ETNA hob is switched on, the hob has been wrongly connected. You should have the electrical connection checked.
What to do if my ETNA KI2160RVS Hob suddenly stops working and shows '--' or 'H'?
If your ETNA hob suddenly stops working and the displays show ‘--’ or ‘H’, it means that the control panel is dirty or there is an object on it. Clean the control panel and remove any objects, moisture, or dirt.
What does error code E6 mean on my ETNA KI2160RVS Hob?
Error code E6 on your ETNA hob indicates that the internal temperature of the hob is too high, there is an error on fan left or right, or the air exhaust is blocked, for example by paper. Check that the fan air exhaust is free. If the error persists, further assistance is needed.
Why does my ETNA KI2160RVS Hob display ‘u’ when I switch on a cooking zone?
If your ETNA hob displays ‘u’ when you switch on a cooking zone, the pan you are using is not suitable for induction cooking or has a diameter of less than 12 cm. Use a suitable pan.
How to remove 'Lo' symbol from ETNA KI2160RVS Hob timer display?
If the symbol 'Lo' appears in the timer display of your ETNA hob, the key lock function is activated. To deactivate it, switch on the hob, then touch and hold the lock key.
What to do if a cooking zone on my ETNA KI2160RVS Hob suddenly stops and I hear a signal?
If a cooking zone on your ETNA hob suddenly stops working and you hear a signal, the preset time has ended. Switch off the bleep by touching the + key of the timer.
What does error code E1 or E2 mean on my ETNA KI2160RVS?
Error code E1 or E2 on your ETNA hob means the supply voltage or frequency is different from the rated values. Switch off the hob and let it cool down until ‘H’ disappears from the displays. Then, switch the hob back on. If the same error is displayed again, further assistance is needed.
What does error code E7 or E8 mean on my ETNA KI2160RVS?
Error code E7 or E8 on your ETNA hob indicates that the power supply voltage is incorrect. Check the electrical connection.
What does error code E3 mean on my ETNA Hob?
Error code E3 on your ETNA hob means the cooking zone temperature is too high. You should switch off the hob and allow it to cool until ‘H’ disappears from the displays, then switch the hob back on.
To Next Page
General
