How to deactivate the child lock on my ETNA KI260ZT?
The 'L' symbol appearing on your ETNA Hob indicates that the child lock function is activated. To deactivate it, turn on the hob, touch the plus (+) and minus (-) keys simultaneously, and then touch the plus (+) key again.
What to do if my ETNA KI260ZT Hob is not working and the display is blank?
If your ETNA Hob is not working and the display is blank, it may be due to a lack of power supply caused by a defective cable or faulty connection. Check the fuses or the electric switch (if there is no plug).
What does error code E3/E4 mean on my ETNA KI260ZT Hob?
Error code E3/E4 on your ETNA hob indicates that the supply voltage or frequency differs from the rated values. Turn off the hob and allow it to cool down until the 'H' disappears from the display. Then, turn the hob back on. If the error persists, contact an authorized service agent.
What does error code E5 mean on my ETNA KI260ZT Hob?
Error code E5 on your ETNA hob means that the internal temperature of the hob is too high. Turn off the hob and let it cool down until the 'H' disappears from the displays. Then, turn it back on. If the same error appears again, contact an authorized service agent.
What does error code E1 mean on my ETNA KI260ZT?
Error code E1 on your ETNA hob indicates an error with the fan on the left or right side, possibly due to a blocked air exhaust. Ensure that the fan air exhaust is free from obstructions.
Why did my ETNA KI260ZT Hob cooking zone suddenly stop and beep?
If a cooking zone on your ETNA hob suddenly stops working and you hear a signal, it is because the preset time has ended. You can switch off the sound by touching the + key of the timer.
Why does the fuse blow when I turn on my ETNA KI260ZT?
If a fuse blows as soon as you switch on the ETNA hob, it means the hob has been wrongly connected. Have the electrical connection checked.
Why does my ETNA KI260ZT display 'u' when I turn on a cooking zone?
The 'u' displayed on your ETNA Hob when a cooking zone is switched on indicates that the pan you are using is not suitable for induction cooking, or its diameter is less than 12 cm. Use a suitable pan. Bridge cooking zones have to be fully covered by the pans.
General| Type | Gas Hob |
|---|---|
| Width | 60 cm |
| Number of burners/cooking zones | 4 |
| Material | Stainless Steel |
| Ignition type | Electronic |
| Gas type | Natural Gas |
To Next Page
