Need help?Do you have a question about the ETRONIX PULSE EX3GPRO and is the answer not in the manual?
Limits servo travel to prevent strain and potential failure.
Monitors and warns about model temperature using telemetry parts.
Reverses the direction of servo operation for specific channels.
Adjusts steering servo response linearity (exponential).
Adjusts throttle/ESC response linearity (exponential).
Implements automatic pulsing of brakes for cadence braking.
Stores settings for multiple models in the transmitter.
Sets default receiver position upon signal loss.
Accesses various settings like sound, throttle hold, and channel mix.
Mutes transmitter sounds and alarms.
Provides partial throttle application at neutral for engine starting.
Links movement of one channel to another.
Counts time upwards or downwards with optional warnings.
Selects battery type for voltage monitoring and warnings.
Resets all transmitter settings to default values.
Recalibrates transmitter potentiometers for accuracy.
Verifies correct operation of channel inputs and servo travel.
Displays wheel RPM and calculates model speed using a sensor.
To Next Page
General