EasyManuals Logo

ETRONIX PULSE EX3GPRO User Manual

ETRONIX PULSE EX3GPRO
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1. Introduction
Thank you for choosing the Etronix 3 Channel 2.4GHz Frequency Hopping Spread
Spectrum (FHSS) digital proportional system for use in RC cars, boats and other
surface models. Please read and understand this instruction manual then retain it for
future reference.
2. Support
Ifyouencounteranyproblemsinuse,pleaserefertothismanualintherstinstance.
If you cannot resolve your problem using the information provided in this manual,
please contact your local distributor or get in contact with us using our website:
www.etronix-rc.com
3. Safety Guidelines
This radio system is designed for use in high quality radio-controlled models. To
ensure your safety and that of other people around you, please follow these guidelines
carefully.
1. Always follow local laws or regulations regarding the operation of radio-controlled
models.
2.Alwaysturnonthetransmitterrst,followedbythereceiver.Whennished,turnoff
thereceiverrstfollowedbythetransmitter.
3. Please do not attempt to modify this product. Etronix cannot be held responsible
foranydamagethatmightoccurtotheproductasaresultofanunauthorisedmodi-
cation.
4. Please make sure the batteries in the transmitter and those used to power the re-
ceiverhavesucientpowerbeforeusingyourmodel.Usingbatterieswithinsucient
power will reduce the range of the radio and may result in a loss of control.
5. Make sure that any servos and/or ESC are securely connected to the receiver at all
times.
6.Pleasekeeptheradiosystemawayfrommoisture,heat,reandsourcesofelec-
tronic interference at all times.
7. Please do not make any adjustments to transmitter settings while the model is in
motion. Always wait until the model is standing still before making any adjustments
to the transmitter settings.
8. The low voltage warning will activate when the battery in the transmitter is below
4.4v.TheLEDonthetransmitterwillashblueandwillbeaccompaniedbyabeeping
sound. Please stop using your model immediately if the low voltage warning activates
to prevent loss of control.
9. Etronix will not be held liable or responsible for any damages caused by the opera-
tion of your radio-controlled model.
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ETRONIX PULSE EX3GPRO and is the answer not in the manual?

ETRONIX PULSE EX3GPRO Specifications

General IconGeneral
BrandETRONIX
ModelPULSE EX3GPRO
CategoryReceiver
LanguageEnglish