EasyManua.ls Logo

EUCHNER CES-AP Series User Manual

EUCHNER CES-AP Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EN
Operating Instructions
Non-Contact Safety Switch
CES-AP-C01-… (Unicode/Multicode)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the EUCHNER CES-AP Series and is the answer not in the manual?

EUCHNER CES-AP Series Specifications

General IconGeneral
SeriesCES-AP
TypeSafety Switch
Temperature Range-25°C to +70°C
Supply Voltage24 VDC
Number of Safety Contacts2
Number of Auxiliary Contacts0
Housing MaterialPlastic
Protection RatingIP67
Connection TypeCable or Connector
Safety CategoryEN ISO 13849-1: PL e
Contact Configuration1NO/1NC or 2NC

Summary

About This Document

Scope

Defines the scope of the operating instructions and applicable device versions.

Target Group

Identifies the intended audience for the operating instructions.

Key to Symbols

Explains the meaning of various symbols used in the document.

Supplementary Documents

Lists other documents that form the complete user information.

Correct Use

Description of the Safety Function

Exclusion of Liability and Warranty

General Safety Precautions

Function

Door Monitoring Output

Details the function of the door monitoring output.

Diagnostic Output

Explains the diagnostic output signal and its meaning.

Limit-Range Monitoring

Describes how the device monitors the actuator's position within its range.

Switching States

Outlines the different states of safety outputs and indicator LEDs.

Changing the Approach Direction

Mounting

Electrical Connection

Notes About ULUS

Provides important notes regarding UL/cULus certification and usage requirements.

Safety in Case of Faults

Describes safety features related to fault conditions and protection.

Fuse Protection for Power Supply

Details the requirements for fuse protection of the power supply.

Requirements for Connecting Cables

Specifies the technical requirements for connecting cables.

Connector Assignment of Safety Switch CES-AP-C01

Illustrates the pin assignments for the safety switch connectors.

Connection

Provides an example connection diagram for the safety switch system.

Notes on Operation with Safe Control Systems

Gives requirements for connecting the device to safe control systems.

Devices for Direct Connection to IP65 Field Modules

Explains connection to decentralized peripheral systems and IP65 field modules.

Setup

LED Displays

Explains the meaning of the different LED indicators on the device.

Teach-in Function for Actuator

Describes the procedure for assigning actuators to the safety switch.

Functional Check

Details the steps for verifying the correct operation of the safety function.

System Status Table

Technical Data

Technical Data of Safety Switch CES-AP-C01-...

Provides detailed technical specifications for the CES-AP-C01-... safety switch.

Technical Data of Actuator CES-A-BBA...

Details the technical specifications for the CES-A-BBA actuator.

Technical Data of Actuator CES-A-BDA-18

Provides technical specifications for the CES-A-BDA-18 actuator.

Technical Data of Actuator CES-A-BPA

Lists technical specifications for the CES-A-BPA actuator.

Technical Data of Actuator CES-A-BRN.

Contains technical specifications for the CES-A-BRN actuator.

Ordering Information and Accessories

Inspection and Service

Service

Declaration of Conformity

Related product manuals