Need help?Do you have a question about the EUCHNER CTP and is the answer not in the manual?
General| Protection class | IP67 |
|---|---|
| Series | CTP |
| Connection type | M12 connector |
| Number of safety contacts | 2 |
| Supply voltage | 24 VDC |
| Voltage Rating | 24 VDC |
| PL (Performance Level) | PL e |
| Coding level | High |
| Enclosure material | Plastic |
| Housing material | Plastic |
| Type | Safety switch |
| Mechanical Life | 1 x 10^6 operations |
| Electrical Life | 100, 000 cycles |
| Operating Temperature | -25°C to +55°C |
Describes the interlocking function and safe operation principles of the safety switches.
Highlights requirements for risk assessment and relevant safety standards.
Explains the safety function of monitoring guard locking and door position.
Details guard locking control via IMP/IMM and IO-Link communication.
Provides essential safety measures to prevent injury and damage.
Details the monitoring of guard locking status and safety outputs.
Explains guard locking actuation and release for different versions.
Guides on actuating auxiliary and auxiliary key release mechanisms.
Explains how to perform emergency and escape releases.
Provides instructions and warnings for mounting the device securely.
Details various connection options for the safety switch.
Provides pin assignments for various switch connector types.
Guides through the teach-in process for actuators in unicode evaluation.
Details procedures for mechanical and electrical functional testing.
To Next Page