Manual EKS Electronic-Key Adapter USB
2094485-05-07/19 Subject to technical modifications Page 5/34
1.1.2 Abbreviations
The following abbreviations are used in this manual:
AC Alternating Current
BCC Block Check Character
CTS Clear To Send
DC Direct Current / Diagnostic Coverage
DIP Dual Inline Package
DLE Data Link Escape (acknowledgment)
E²PROM Electrically Erasable Programmable Read-Only Memory
EKS Electronic-Key-System
EKS FSA Electronic-Key-System For Safety Applications
ETX End of TeXt
FHC Front Hook Compact
FSA For Safety Applications
LED Light Emitting Diode
MTTF
d
Mean Time To Dangerous Failure
NAK Negative AcKnowledgment
PA PolyAmide
ADT Acknowledgment Delay Time
ROM Read-Only Memory
STX Start of TeXt
USB Universal Serial Bus
CDT Character Delay Time
1.2 CE conformity
The EKS devices with USB interface correspond to the Radio Equipment Directive (RED) 2014/53/EU and the
RoHS Directive 2011/65/EU. The devices comply with the following European standards:
EN 55011 Industrial, scientific and medical equipment – Radio-frequency disturbance
characteristics – Limits and methods of measurement
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity standard
for industrial environments
EN 50364 Product standard for human exposure to electromagnetic fields from devices operating
in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS),
Radio Frequency Identification (RFID) and similar applications
E
N 300330 V2.1.1 Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz
and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised
Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
EN 50581 Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
To Next Page
Loading...
