EUCHNER MGB-L1 AR Series User Manual

Operating Instructions Safety Systems
MGB-L1…-AR.-… / MGB-L2…-AR.-… and MGB-L1…-AP.-… / MGB-L2…-AP.-…
42
(Translation of the original operating instructions) 2119167-06-10/20
18. Inspection and service
WARNING
Loss of the safety function because of damage to the device.
Ì In case of damage, the affected module must be replaced completely. Only accessories or spare
parts that can be ordered from EUCHNER may be replaced.
Ì Check the device for proper function at regular intervals and after every fault. For information
about possible time intervals, refer to ENISO14119:2013, section 8.2.
Regular inspection of the following is necessary to ensure trouble-free long-term operation:
Ì Check the switching function (see chapter 13.3. Electrical function test on page 35)
Ì Check the secure mounting of the devices and the connections
Ì Check for soiling
No servicing is required. Repairs to the device are only allowed to be made by the manufacturer.
NOTICE
The year of manufacture can be seen in the lower right corner of the rating plate.

EUCHNER MGB-L1 AR Series Specifications

General

Brand	EUCHNER
Model	MGB-L1 AR Series
Category	Safety Equipment
Language	English