Need help?Do you have a question about the EUFY RoboVac 25C and is the answer not in the manual?
Remove stickers and foam blocks from the robot before initial use.
Ensure the path is clear of objects that could hinder the robot's movement.
Keep the charging base plugged in; its LED is solid white when powered.
Fully charge the RoboVac before first use; the LED breathes orange while charging.
Download the EufyHome app to complete Wi-Fi connection and control the robot.
Remove power cords and small objects to prevent entanglement.
Fold tasseled rug edges; avoid very dark or high-pile rugs over 26mm.
Keep RoboVac away from spaces under 73mm to prevent it from getting stuck.
Keep RoboVac away from damp or wet locations.
Remove objects under 16mm that RoboVac might climb on.
Use physical barriers to block areas where RoboVac might fall down stairs.
Use boundary strips to create virtual barriers for specific areas (RoboVac 35C only).
General| Suction Power | 1500 Pa |
|---|---|
| Battery Life | Up to 100 minutes |
| Dustbin Capacity | 0.6 L |
| Connectivity | Wi-Fi |
| Dimensions | 12.8 x 12.8 x 2.85 inches |
| Weight | 5.73 lbs |
| Smart Control | Yes |
| Cleaning Modes | Auto, Spot, Edge, Single Room |
| Battery Capacity | 2600 mAh |
| Noise Level | 55 dB |
| Drop Sensing Technology | Yes |
| Bump Sensor | Yes |
| Auto-Return to Charging Dock | Yes |
| Scheduling | Yes |
| Charging Time | 300-360 minutes |
| Control | App, Voice control (Amazon Alexa, Google Assistant) |
To Next Page