Euhomy CFJ-30 - Problems and Troubleshooting

Problems and Troubleshooting
Car refrigerator does not work
Advice: ln the case of any abnormal situation that cannot be resolved through simple fault analysis,
please contact Customer Service for assistance.
lt is normal for some condensation to collect on the surface of the refrigerator when
humidity is more than 75%.
Check that the power is connected properly.(Check if the plug is loose or positive and
negative poles are reversed.)
Check that the power button on the control panel is turned on.
Check that the cooling ventilation is normal.
Check if the fuse is blown.
Poor cooling performance
Check that the lid is closed properly.
Check if the door seal is damaged or deformed.
Check if there is poor ventilation around the fridge.
Check that the temperature is set properly.
Abnormal noise
Refrigerator is not set on a flat, level surface.
Check for vibrations in surrounding objects.
Parts inside the refrigerator have come loose or fallen off.
Error Code
E1
Low input voltage
Fan fault
lnput voltage fault due to compressor starting and stopping frequently
Low rotational speed of compressor
Overheating of controller chip
Temperature sensor wire disconnected
E2
E3
E4
E5
E6
Error Type
Refrigerator condensation
Definition of error codes
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Refrigerator is not put on a flat level surface.
Check for vibrations in surrounding objects.
07