04
Optional Operation Method
Battery protection setting (factory default voltage is H)
Battery protection levels: H (high) > L (low) > M (medium)
ECO: Energy-saving cooling MAX: Powerful cooling
The set level will flash for 3 seconds, then exit and save the current setting.
Press for 3 seconds to access the battery protection setting. Press the button again to
switch between H, L, and M.
Press to switch the fridge on.
Press again to switch the fridge off.
Press the button to select MAX or ECO mode.
ln MAX mode, the compressor runs quickly to reduce
temperature.
ln ECO mode, the compressor runs slowly to save energy.
Press the button once to increase the set temperature by
1 degree. Press and hold the button to increase the set
temperature quickly.
Press the button once to decrease the set temperature by
1 degree. Press and hold the button to decrease the set
temperature quickly.
Battery Protection Setting (factory default voltage is H)
The on-board refrigerator has the power failure memory function. When the refrigerator
is powered off, the working state (ON/OFF, working mode, etc.) before the shutdown can
be automatically restored at the next startup without resetting.
Press and simultaneously for 3 seconds to change the
temperature units between and Please be sure no any
symbol is flashing when you use this function.
ltem Description Explanation
Power button
Settings button
Temperature
increase button
Temperature
decrease button
Temperature
scale selection
To Next Page
Loading...
