EasyManua.ls Logo

Eureka fc9 Plus - Page 6

Eureka fc9 Plus
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SELF-CLEANING/DRYING FUNCTION
After putting the whole machine into the base, make sure the charging
indicator is under the green state, step on the pedal of roller brush
auto-drying function with your foot, the machine will start the self-clean-
ing function and then automatically turn on the drying function after the
self-cleaning,and the whole process lasts about 1 hour;Step on the pedal
of roller brush self-cleaning function with your foot, and the machine will
only open the self-cleaning function,and the whole process lasts about 2
minutes. Please clean the sewage tank in time after completion to avoid
peculiar smell.
INDICATOR LIGHT CIRCLE
FUNCTIONS
There is a half circle gradual changing indicator light on the machine
display screen, which can indicate the floor dirt level. Red represents the
floor is dirty, and green represents the floor is clean. When the machine is
used to clean heavily dirty floor, the initial color is red, and it will turn
green after cleaning.
Indicator light circle
10
Pull the clean water tank up vertically to remove it.
Open the lid of clean water tank and fill it with tap water. If deep clean-
ing is required, just pour the cleaning solution into the water tank again
according to the specified proportion.
Close the lid of clean water tank, and make sure it is tight without loosening.
Reinstall the clean water tank to the machine body. After hearing a
click, the installation is successful.
When the clean water tank is short of water, a voice message will be issued.
1.
2.
3.
4.
5.
REFILL OF CLEAN WATER TANK
FUNCTIONS
CLEANING OF DIRTY WATER TANK
Gently press the release button of dirty water tank to remove it.
Hold the tank body with one hand, and pull the lid up and out with the other hand.
Dispose the dirty water, and then reinstall the tank to the machine body.
After hearing a click, the installation is successful.
When the dirty water tank is full, a voice message will be issued.
1.
2.
3.
4.
Press
Pull
PushPull
11
Pedal of roller brush
self-cleaning function
Pedal of roller brush
auto-drying function

Related product manuals