The app supports iOS versions 10.0 and above and
Android versions 6.0 and above. The app is not available
for use with tablets.
This model does not support a WEP encrypted router.
The home Wi-Fi name and password must contain only
letters, numbers and standard symbols.
The network accessing configuration of the robot
requires a Wi-Fi network of 2.4GHz frequency range.
The robot must be connected to Wi-Fi to enable
controlling the robot using the app. Once you have set up
the app and connected the robot to Wi-Fi, the app can be
used to control the robot in Wi-Fi/2G/3G/4G/5G network
environment.
If your home Wi-Fi password is changed or the router is
replaced, the robot will show as oine in the app; you will
need to reconnect the robot to Wi-Fi following the Wi-Fi
connection instructions.
NOTES
NOTES
●
●
●
●
●
●
In the App Store or Google Play, search for
Eureka Robot, download and install the app.
Open the Eureka app and complete the
registration process, which includes an email
address confirmation, and once you have
confirmed your email address you can log in
and follow the setup instructions in the app.
Connect your phone to your home Wi-Fi
network.
In the app select Add Devices and choose
Robot NER650.
Connect your robot to your Wi-Fi
After assembling and powering on the robot,
press and hold down the " " button for
3 seconds until a beep is heard.
The Wi-Fi indicator light should start to flicker.
Follow instructions on app for next steps.
1.
2.
3.
4.
5.
If the Wi-Fi in your home is unstable, it may cause
issues with the operation of the Eureka Robot App.
The content of the Eureka Robot App may change
when the version is updated.
Please refer to the Eureka Robot interface
for details.
Back to
previous
page
Robot
settings
Cleaning area
Start cleaning
Battery
Cleaning
mode
Charge
Note: This interface will be upgraded later, this interface
is for reference only.
NOTES
Amazon Alexa
1. Open Amazon Alexa App
2. Select ‘Skills & Games’ and search for
Eureka Robot and select
3. Enable the Eureka robot skill
4. Your Eureka robot app will then open and you will
login using your Eureka robot app credentials
5. The Eureka robot skill and the app should now be
successfully linked, and this will be indicated on the
Amazon Alexa app.
6. You can now use the following commands to
control the robot:
“Alexa, tell Eureka robot to start cleaning”
“Alexa, tell Eureka robot to stop cleaning”
“Alexa, tell Eureka robot to go home”
Google Home
1. Open Google Home App
2. Search for Eureka robot and select
3. Link Eureka robot skill
4. Your Eureka robot app will then open and you
will login using your Eureka robot app credentials
5. The Eureka robot skill and the app should now
be successfully linked
6. You can now use the following commands to
control the robot:
“Ask Eureka robot to start cleaning”
“Ask Eureka robot to stop cleaning”
“Ask Eureka robot to go home”
Setting Up App and Connecting to Wi-Fi
Using Eureka Robot App
Using Amazon Alexa or Google Home
Cleaning
time
Customized
cleaning
Map album
www.eureka.com 13
To Next Page
Loading...
