Step 1 Disconnect the hose by depressing the projection in the hole on each side of handle.
Assembling
Step 1 Slide the projection on the hose supporter of the hose into on either side.
5 Trouble Shooting Chart
The vacuum cleaner can not
start operation
1.The plug is not plugged in
2.The power switch didn't open.
3.Internal wiring of loose
4.The motor burned out
2.Press the power switch
3.Re connect the internal wiring
4.Repair or replacement of the
new machine
The suction become smaller
1.The channel blocked suction head
2. Poor ventilation dust bag
3. Air inlet and outlet filter blocked
4. Motor problems
1.Clean the suction
head channel
2.Clean up the dust bag
3.Cleaning filter
4. Repair replacement of
the motor
1. The dust suction channel block
1.Clean up the dust absorption
To Next Page
Loading...
