12
GB
13
GB
1II. Alternative hanging of a door (glass door and full glass door only)
x3 x4x3
C E
x3
DB GF H JA
1
2
4
3
You can change which way it opens. Proceed as follows (example for
changing a right hand door to a left hand door):
5 Loosen the door pivot guide.
6 Remove the grommets gently using a fine blade and in its place fit the
pin. Relocate the grommet on the opposite side.
6
5
9 Turn the door 180°.
Warning: the glazed doors are very heavy. Take all necessary
precautions not to injure yourself or drop the door.
10 Replace the door on its pivot guide.
12
11
13
9
1 Loosen the three screws using the Torx “T25” tool.
2 Remove the upper hinge.
3 Remove the grommets gently using a fine blade.
4 Lift the door from the lower hinge by opening the door slightly and
then lifting it.
11 Relocate the upper hinge.
12 Relocate the hinge in such a way so that the door is parallel with the
case. Check (by closing the door) that the seal adheres well to the
housing and is leak proof.
13 Replace the grommets.
7 Loosen the four screws.
8 Locate the foot on the other side of the housing using the screws.
8
7
A Upper hinge
B Grommets
C Grommets
D Torx screw
E Screw
F Closing clip
G Lower hinge
H Door pivot guide
J Door axis plug
4/ INSTALLING YOUR WINE CABINET
Your wine cabinet EuroCave has been designed to evolve. Depending on the model, it can be adapted to your requirements and be modified in
terms of storage.
We strongly recommend that you do not leave your wine bottles:
- Wrapped in tissue paper inside your EuroCave wine cabinet. Tissue paper does not tolerate ambient humidity in the long-term. The saturated
paper will stick to your bottle labels and damage them.
- Stored in cardboard packaging or a wooden case in your EuroCave wine cabinet, in order to encourage maximum air flow around the bottles
and prevent the packaging from deteriorating, which could eventually contaminate your wine bottles.
Various storage methods
Universal storage
shelf
Ref.: AXLNH
Universal sliding
shelf, fitted with the
"Main du sommelier"
Ref.: ACMSC
Optional articulated
presentation for
ACMSC shelves
Ref.: AOPRES
Capacity: 50 bottles
Max. weight: 85 kg
Capacity: 8 bottles Capacity: 9 bottles
with 5 inclined
The layout of your wine cabinet can be modified according to your requirements.
Refer to pages 72 to 74 to look at arrangement examples.
How to use the storage shelf (Ref.AXLNH)
To store bottles of Bordeaux:
Turn each metal rod so that it is in contact with
the wall of the cabinet. Storage for 4 rows at the
front and 5 rows at the back, or 50 bottles*.
To store bottles of Burgundy:
Remove themetal rods.
Storage on 7 levels, 8 bottles on each level, or
56 bottles*
* Each shelf is fitted with a label holder.
5/ LAYOUT – STORAGE
4/ INSTALLING YOUR WINE CABINET
14
Lock
14 As the door has turned 180 degrees, reposition your handle above
the lock (Full Glass and Black Piano doors only): Unscrew the six
screws placed on the side of the door, using the Allen wrench (2,5
mm), which you will find in the handle's box.
15 Position the handle on the specially designed groove on the door
frame. Insert the handle all the way into the groove using a forward
movement.
16 Screw the six screws back on. Take care not to catch the seal when
screwing.
Vue du dessus
16 Positionnez la poignée sur
la rainure du cadre de porte
prévue à cet effet. Emboîtez
complètement la poignée dans
la rainure grâce à un
mouvement vers l’avant.
17 Revissez les trois vis.
Prenez garde à ne pas pincer
le joint au moment du vissage.
18 Replacez les trois
bouchons.
Poignée
Cadre de porte
Côté face
avant
Joint
Serrure
15
16
Handle
Seal
Front
Door frame
View from above
Alternative hanging of a door (Full glass door only on models S-259V3, V-259V3)
To Next Page
Loading...
