Euromaid EO910TS - Replacing the Oven Lamps

34
CLEANING & MAINTENANCE
Replacing the Oven Lamps
Warning! Ensure that the appliance is switched o before replacing the lamp to
avoid the possibility of electric shock. Remove the glass cover of the lamp-holder.
Remove the lamp and replace with a lamp resistant to
high temperatures (300°C) with the following characteristics:
• Voltage: 220-240V
• Wattage: 25W
• Type: G9
Note: Replacement lamps are available from Glen Dimplex.
Replace the glass cover and reconnect the oven to the mains power supply.
1 2 3
Replacing the side lamp
1
Remove the side racks.
2
Take o the protective glass cover.
3
Pull the light bulb down to remove it.
4
Aer inserting the new bulb,
install the glass cover and side
racks back to their original position.