10
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
Troubleshooting guide
If your heater fails to operate, or you experience any other problem with the
appliance, please contact our after sales support centre for advice or to
arrange a service. Before phoning for a service, please ensure that:
• Your heater is properly plugged in.
• The outlet is working and the circuit breaker or fuse are also working.
Other Useful Information
Cleaning, maintenance and storage
If the outside of the heater needs cleaning, wipe it with a soft, damp cloth
and then wipe it dry with a dry cloth. Allow some time for the heater to dry
thoroughly before reconnecting it to the power supply.
Do not use abrasive cleaning powders or devices, furniture polish or harsh
chemical cleaners, as this can damage the surface finish.
CAUTION: Never immerse the cord, plug or heater in water or other liquid for
cleaning. Do not allow water to enter the interior of the heater.
Dust on the grilles and inside the appliance can often be removed by using a
vacuum cleaner with a crevice tool or soft brush attachment.
If you must remove the front grille for cleaning behind it, remove the screws
and nut using a screwdriver. Take care not to touch the heating elements
during cleaning. Make sure to fix the front grille securely back in place before
reuse.
Storage
If you are not going to use the heater for a while, please unplug it at the
electrical outlet.
Clean the appliance as described above.
Disassemble the wheel base assemblies and store the appliance in the original
carton to protect it from dust. Store it in a cool and dry place, out of children’s
reach.
CAUTION!
Always switch off and disconnect the appliance from the power supply
and let to cool before attempting any maintenance or cleaning the heater.
To Next Page
Loading...
