9
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
To heat up a room fast, we recommend you set the thermostat to the maximum
position, and when the room is comfortably warm, slowly turn the control
anticlockwise until the heater stops working. The heater will now cycle on and
off automatically as the temperature drops and rises.
Switching off
Select the OFF power setting and set the thermostat control to the minimum
position, then unplug the heater at the electrical outlet.
Let the heater cool down before restarting it, if required.
NOTE: The heater will take some time to cool after the power is shut off.
Always wait until it has cooled before moving the heater, and then use the built-
in handle for easy movement, if required.
Operating Instructions (Cont.)
FIRST USE
When switching the heater on for the first time, it may produce smoke
or odour when first heating up. This is due to the components being new
and can be disregarded safely. It is entirely harmless.
Ensure there is adequate ventilation.
Tip-over safety switch
The appliance is fitted with a tip-over safety switch which shuts off the
appliance automatically when it is tipped over. When returned to normal
upright position, heat will automatically come on again. This is a safety
feature to avoid the possibility of fire should the unit be accidentally tipped
over.
CAUTION!
Do not attempt to open the heater and repair it yourself. Any repairs must
be carried out by a qualified technician.
To Next Page
Loading...
