EUTECH INSTRUMENTS Ion 700 User Manual

TABLE OF CONTENTS
1. INTRODUCTION .............................................................. 1
2. GETTING STARTED........................................................ 2
2.1 Keypad Functions ...................................................................2
2.2 LCD Annunciators...................................................................3
2.3 Meter Connections..................................................................3
3. CALIBRATION................................................................. 4
3.1 pH Calibration .........................................................................4
3.2 Temperature Calibration .........................................................5
3.3 Millivolt (mV) Offset Adjustment ..............................................6
3.4 Ion Calibration (Ion 700 Only) .................................................6
4. STORING AND RECALLING DATA ............................... 7
5. SETUP FUNCTIONS........................................................ 8
5.1 P1.0 CAL (Calibration) ............................................................8
5.2 P2.0 ELE (Electrode Information)............................................8
5.3 P3.0 ConF (Configuration) ......................................................9
5.4 P3.1 rdY (Ready / Stability Indicator) ......................................9
5.5 P3.2 °C°F (Celcius Or Fahrenheit)..........................................9
5.6 P3.3 buFF (pH Buffers & Calibration Points)...........................10
5.7 P4.0 rSt (Reset) .....................................................................10
5.8 P5.0 CLr (Clear Memory).......................................................10
6. TROUBLESHOOTING GUIDE......................................... 11
7. ION SELECTIVE ELECTRODES..................................... 13
8. SPECIFICATIONS............................................................ 14
9. WARRANTY..................................................................... 15
10. RETURN OF ITEMS......................................................... 15

EUTECH INSTRUMENTS Ion 700 Specifications

General

pH Range	-2.00 to 16.00 pH
Calibration Points	Up to 5 points with Auto-buffer recognition, From 2 to 5 consecutive points; 0.1, 1.0, 10.0, 100.0 or 1000.0 ppm
Buffer Options	USA : pH 1.68, 4.01, 7.00, 10.01, 12.45 NIST: pH 1.68, 4.01, 6.86, 9.18, 12.45
mV Range	± 2000 mV
Temperature Range	0.0 to 100.0 ºC / 32.0 to 212.0 ºF
Calibration	Offset in 0.1 º increments; Offset range: ± 5.0 ºC / 9.0 ºF
Ion Range (Ion 700 only)	0.01 to 2000 ppm ( ± 2000mV)
Resolution	0.01 pH, 0.1 mV (± 199.9 mV), 1 mV beyond ± 200 mV, 0.1 ºC / ºF
Accuracy	± 0.01 pH, ± 0.2 mV (± 199.9 mV), ± 2 mV beyond ± 200 mV, ± 0.3 ºC/± 0.5 ºF (0 to 70 ºC), ±0.5% FS (mono-valent) ±1.0% Full Scale (di-valent)
Offset Adjustment	Up to ±150 mV
Compensation	Automatic or Manual (0 to 100 ºC / 32 to 212 ºF)
Resolution (ppm)	0.01/ 0.1/1 ppm
Slope Range	15 mV/decade to 90 mV/decade
Slope Display	Yes (with offset)
Memory	100 data sets
Inputs	BNC, ATC, Reference (Half-cell)
Power	AC/DC 9V, 6W Adapter (100/240 VAC, 50-60Hz)