Evco c-pro 3 nano Series User Manual

EVCO S.p.A. c-pro 3 nano | Hardware Manual ver. 1.0 | Code 114CP3NE104
page 13 of 26
If option available, to set the language for viewing the application software
proceed as follows.
2.
Touch the UP or DOWN key to select the current
viewing label, for example the label “EnG”
(English).
The display will show
Upper line MEnu
Lower line EnG
3. Touch the SET key.
4.
Touch the UP or DOWN key to select a label, for
example “ItA” (Italian).
The display will show
Upper line MEnu
Lower line itA
5. Touch the SET key.
6.
Touch the ON/STAND-BY key a few times to
return to the main display.
To set the date and time proceed as follows (only available for the
c-pro 3 nano plus).
2.
Touch the UP or DOWN key to select the sub-
menu “rtC”.
The display will show
Upper line Menu
Lower line rtC
3. Touch the SET key.
The display will show
Upper line YEAr
Lower line The last two digits of the year
4. Touch the SET key again.
5. Touch the UP or DOWN key to set the year.
6. Touch the SET key.
7. Touch the DOWN key to select the next label.
The display will show
Upper line Mont
Lower line month (01… 12)
8. Touch the SET key.
9. Touch the UP or DOWN key to set the month.
10. Touch the SET key.
11. Touch the DOWN key to select the next label.
The display will show
Upper line dAY
Lower line day (01… 31)
12. Touch the SET key.
13. Touch the UP or DOWN key to set the day.
14. Touch the SET key.
15. Touch the DOWN key to select the next label.
The display will show
Upper line Hour
Lower line Hour (00… 23)
16. Touch the SET key.
17. Touch the UP or DOWN key to set the hour.
18. Touch the SET key.
19. Touch the DOWN key to select the next label.
The display will show
Upper line Min
Lower line minute (00… 59)
20. Touch the SET key.
21. Touch the UP or DOWN key to set the minute.
22. Touch the SET key.
23. Touch the DOWN key to select the next label.
The display will show
Upper line SEc
Lower line second (00… 59)
24. Touch the SET key.
25. Touch the UP or DOWN key to set the second.
26. Touch the SET key.
27. Touch the ON/STAND-BY key.
The display will show
Upper line SAvE
Lower line YES
28.
Touch the SET key to save the changes and exit
the procedure.
28’.
Touch the UP or DOWN key to select the label
“no”.
The display will show
Upper line SAvE
Lower line no
28’’.
Touch the SET key if the changes are not to be
saved and to exit the procedure.
29.
Touch the ON/STAND-BY key a few times to
return to the main display.

Evco c-pro 3 nano Series Specifications

General

Brand	Evco
Model	c-pro 3 nano Series
Category	Controller
Language	English