EasyManua.ls Logo

Evenflo Gold SECUREMAX - Care and Cleaning; Proper Disposal of this Child Restraint

Evenflo Gold SECUREMAX
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
116 117
Care and Cleaning
DO NOT lubricate or immerse in water the LATCH connectors, the
buckle, or any other part of this child restraint, unless rinsing is
permitted, as stated on the back of the buckle for your restraint.
Plastic and metal parts may be wiped clean with mild soap and water
and dried with a soft cloth. Do not use abrasive cleaners or solvents.
Take care not to damage any labels.
The harness can be wiped clean with mild soap and water. Allow
harness to air dry.
Machine wash the seat pad separately in cold water, delicate cycle.
Tumble dry 10 to 15 minutes on low heat.
NEVER use child restraint without the seat pad.
To protect the child restraint from damage caused by weather,
rodents, and other elements common to garages, the outdoors, and
other storage locations, remove the seat pad and thoroughly clean
the restraint and pad prior to storage. Take care to clean in the areas
where crumbs and other debris tend to accumulate.
To help protect the vehicle upholstery, place a
towel beneath and behind the child restraint.
Tip!
Tip!
When this child restraint reaches the expiration date
found on the date of manufacture label, Evenflo
encourages you to dispose of it properly. Most
components of this child restraint are recyclable.
1. Remove all fabric and padding.
2. Remove all screws and disassemble the restraint.
3. Recycle all fabric, padding, plastic, foam and
metal parts, if accepted by your local recycling center.
Responsibly discard the rest.
If your local recycling center won’t accept the padding,
you may dispose of it in the landfill.
To prevent injury due
to hidden damage,
lost instructions,
outdated technology,
etc., discontinue use of
this restraint after the
expiration date on the
label or if it has been
involved in a crash.
Fabriqué en
Manufactured in
Name / Nom
Model / Modéle
Made in / Fabriqué en
Expires on/Expire le
(anné-mois-jour)
(
year-month-day)
Proper Disposal of this Child Restraint
Make sure both harness straps are installed
completely on the splitter plate, as shown.After
the cleaning. Failure to properly attach the harness
straps to the splitter plate may result in a loose
harness and serious injury or death to your child.
WARNING!

Related product manuals