Evenflo Maestro - Installation with Seat Belt

19
Installation with Seat Belt
IMPORTANT: If you are using the vehicle seat belt to
secure the child restraint, DO NOT use the LATCH straps.
1. Disconnect tether
hook from the back
of the child restraint.
Tether Strap
2. Place the child
restraint in
position.
Set child restraint on
vehicle seat in forward-
facing position.
Lay the tether strap over
the back of the vehicle
seat.
3. Route vehicle seat
belt through belt
path and buckle it,
as shown.
Vehicle Belt
Path
Using with the 5-pt Harness