21
6. Ensure child
restraint is secure.
Try to move the child
restraint in all directions.
IMPORTANT: To properly
protect the child, the child
restraint MUST NOT move
more than 25 mm (1 inch)
from side-to-side or from
front-to-back at the vehicle
belt path.
If you cannot
tightly secure the child
restraint, try again or move
it to another location.
Vehicle Belt
Path
Installation with Seat Belt
7.
Connect and tighten
tether strap.
Connect the tether hook
to the anchor behind
the vehicle seat, as shown.
Pull the strap and tighten the tether securely.
IMPORTANT: If your tether strap is too short to reach
from the child restraint to your vehicle tether anchor,
you will need a Tether Extender. Please call ParentLink at
1-800-233-5921 (U.S.), 1-937-773-3971 (Canada), or
01-800-706-12-00 (Mexico).
Using with the 5-pt Harness
To Next Page
Loading...
