B
Or
To remove the clip
F
,
pull the red release
strap
G
and remove clip
from anchor
E
.
F
E
G
Or
The Lower Anchor Connector that comes with your
child restraint will be one of the two types below.
Tilt the adjuster
A
and
slide the strap to loosen.
Press the adjuster release
button
B
to loosen.
C
3
When the Lower anchor
connector assembly is
not in use you MUST
attach the hooks
C
to
the bottom of the child
restraint. A loose Lower
Anchor Connector
assembly strap and hook
may injure your child.
Removing the Lower Anchor
Connectors
Installing the Accessories
The optional Head Pillow
D
attaches easily and helps
support the child’s head.
Note: Attach Head Pillow
through harness slots just
above harness straps.
D
Using your full
weight, push the child
restraint into the vehicle
seat while loosening
the adjuster.
TIP!
TIP!