Evenflo Tribute 5 - Removing the Tether Strap

36 37
Removing the Tether Strap
1
3
• To avoid a strangulation hazard, you MUST tightly
roll or fold excess tether strap and secure with the
strap/rubber band.
• Attach the tether hook to the storage clip when not
in use. This will keep an unused tether from hitting
someone during a crash.
WARNING
2
When the tether strap
is not in use you MUST
attach the hook C to
the back of the child
restraint, and tightly roll
and secure the strap with
the strap/rubber band.
A loose tether strap and
hook may injure your
child.
C
Press the tab B and
twist, then remove
the hook C from the
anchor D.
B
D
Press the adjuster release
button A to loosen
tether strap.
A
C
General
Information
Remove locking clip from vehicle seat belt when not
used with a child restraint, or the vehicle seat
belt will not properly restrain an adult or child.
Serious injury could occur.
WARNING
Thread the locking clip B onto the seat belt, and
slide it into place.
Re-buckle the seat belt. Locking clip must be placed
within 1/2” (13 mm) of buckle tongue.
B
Locking clip MUST
be placed within
1/2” (13 mm) of
seat belt buckle.
2