Even-GLO™ Series GA301
Page 8
October-28-15
Pre-installation Overview
What You Need to Supply
1. Heater anchoring hardware for either the moveable base, flange base mount or
the hanging model.
2. Materials necessary to construct a concrete base for floor mounted model for
GA301-U & GA301-T only.
3. Gas supply line that is installed to the Gas and Electric Supply according to the:
National Fuel Gas Code, ANSI Z.223.1 (NFPA 54) in the US and Natural Gas
and Propane Installation Code, CSA B149.1 or Propane Storage and Handling
Code, B149.2 in Canada.
4. Electrical supply rated at 24 VAC with two stage control for GA301-U, GA301-H
&GA301-T only.
To Next Page
Loading...