System Logs Page(s)
The Inverter keeps a record of all critical events such as system tests and
events and also any alarms that occur. The System Logs accessible are Test
Logs, Event Logs, Alarm Logs and Discharge Logs.
Alarm Logs Page
Displays all of the Alarms sequentially so that number 1 was the most
recent alarm. Displays the Alarm Date, Alarm Time and Alarm Type.
Test Logs Page
Displays all of the System Test results. Similar to Alarm Log, the first log is
the most recent System Test. Displays Start Date, Start Time, Duration of
Test, Faults Present, Starting and Ending AC Output Voltage, Starting and
Ending AC Output Current, Starting and Ending Temperature, Starting and
Ending Battery Voltage.
Event Logs Page
Identical to Test Logs except that the cause of the log was a power outage
or event. Displays all the same information as the Test Logs.
Discharge Logs Page
Displays the battery voltage after each minute of battery discharge during
a test or event. If test or event was shorter than a minute, no data was
stored.
48 | INSTALLATION / OPERATION MANUAL
To Previous Page
Loading...