Eventide ModFactor - Restoring Presets and System Settings

ModFactor User Guide Saving Presets
32
4) Turn the Encoder until [DUMP] is displayed.
5) Momentarily press the Encoder.
6) Turn the Encoder to select [ALL], [CURRENT], [PRESETS] or [SYSTEM].
7) Wait until dump is complete.
8) Press and hold the Encoder and Right Footswitch simultaneously for a few
seconds to exit System Mode.
Note: If [CURRENT] is selected only the currently loaded Preset is dumped. If [PRESETS] is
selected, all 40 stored Presets are dumped. If ALL is selected all Presets and System settings
are dumped. If SYSTEM is selected, only System settings are dumped.
Restoring Presets and System Settings
Presets and System settings are restored via MIDI’s SysEx facility. ModFactor must be set to
the desired SysEx ID number (from 1 to 16). To set the MIDI SysEx ID number (factory default
is 1):
1) Press and hold the Encoder and Right Footswitch simultaneously for a few
seconds to enter System Mode. Release the Encoder.
2) Turn the Encoder until [MIDI] is displayed.
3) Momentarily press the Encoder.
4) Turn the Encoder until [SYS ID] is displayed.
5) Momentarily press the Encoder.
6) Turn the Encoder to choose SysEx ID from [1] to [16].
7) Press and hold the Encoder and Right Footswitch simultaneously for a few
seconds to exit System Mode.