Eventide ModFactor - Restoring Factory Settings and Software Updates; Restoring Factory System Settings; Restoring Factory Effects Presets and System Settings; Software Updates

TimeFactor User Guide System Menu Tree
47
Restoring Factory Settings/Software Updates
Restoring Factory System Settings
To restore System settings, power up ModFactor while simultaneously pressing the Right
Footswitch and the Encoder until [CLEAR SETUP] is displayed.
Restoring Factory Effects Presets and System Settings
CAUTION: This function will overwrite any Presets that you have saved.
To restore Factory Presets and all System settings, power up ModFactor while simultaneously
pressing the Middle Footswitch and the Encoder until [INITIALIZING] is displayed.
Software Updates
ModFactor’s software can be upgraded over USB. Information on software updating can be
found at www.eventide.com.