Everbilt SSB300 - Pre-Installation; Application; Tools Required; Materials Required (Not Included)

4 For Professional Technical Support call 1-844-241-5521
Pre-Installation
APPLICATION
The submersible pump is designed for use as waterfall or fountain application. Use this pump only for pumping water. This pump has not
been tested or approved for use in swimming pools or in salt-water marine areas.
TOOLS REQUIRED
MATERIALS REQUIRED (NOT INCLUDED)
NOTE: Parts shown below not to scale.
Phillips
Screwdriver
Flathead
Screwdriver
Hand
Hacksaw
or PVC
Cutter
Wrench
Safety goggles
Tape Measure
Thread Tape
1-1/4 in.
or 1-1/2 in. 90°elbow