EN-
11
1. Open the telescopic adjustment
buckle of the folding riser.
2. Insert the telescopic riser in the
direction, adjust the required height,
and tighten the adjustment buckle.
Note: If the adjustment buckle is too
tight or too loose, please adjust the
screw at "3" appropriately.
Stand the folding riser up and close it
according to the direction of the picture.
After confirming that the quick
release pin is inserted, lift the tie rod
and wrench in the direction of the
picture.
Press the folding wrench in the direction of the picture to lock the folding riser.
Note: If the folding wrench is too tight or too loose, please adjust the screw at
"1" appropriately.
To Next Page
Loading...
