Code
E00
E06
E07
E09
E10
E11
Meaning
Normal Status
Battery under voltage
Motor fault
Controller fault
Communication receiving fault
Communication receiving fault
EN-
24
Note:
-
ERROR CODE
1.Due to the upgrade of the company's products, the
display content of some parts of the product you get
may be different from the instructions, but it will not
affect your normal use. Everything is subject to the
actual product, and the company reserves the right
of final interpretation.
2.The instrument parameter settings have been set
at the factory. Please operate according to the
instructions and do not change the original settings
of the instrument. Our company will not be held
responsible for any malfunction or damage caused
by failure to follow the instruction manual.
3.Do not immerse the meter in water or use water
spray to clean the meter. When cleaning, wipe with
a soft cloth dampened with clean water. Do not wipe
with any detergent.
4.Please do not dispose of the meter or any other
E-bike accessories as household waste. Please
abide by local laws and regulations and dispose or
recycle E-bike accessories in an environmentally
friendly manner.
To Next Page
Loading...
