OVEN LAMP REPLACEMENT
• The appliance must first be disconnected from the power outlet or turned off at your isolation switch.
The oven, lamp and lamp cover should be cold.
• Unscrew the glass cover attached to the lamp holder by turning anti-
clockwise ¼ of a turn and pull free of the oven.
• Unscrew the lamp and replace it with another high-temperature lamp with
the following characteristics:
Type: SES E 14
Voltage: AC220V-240V
Wattage: 25W
Temperature rating: 300°C
• Remount the glass cover and reconnect the appliance to the power supply
NOTE: Should you experience any difficulty please contact your nearest after-sales service centre.
5
To Next Page
Loading...
