LT-101A User’s Manual
Copyright © EVERFINE, Copy or spread without authorization is prohibited. 21
Chapter 6 Software Instructions
The testing software is specially developed for LT-101A and the instruction is mainly
to help users to use the software rightly. Please read the instruction first before using
the software.
6.1 System requirement
1. Windows operation system in Chinese version;
2. 2M disk space or above;
3. CD driver (used only when installing);
4. Display resolution 1280×1024 is recommended.
6.2 Installation
Insert the CD and enter the catalogue of LT-101A (the last three bits express the
version number, LT-101A_X.XX. The larger the number, the newer the version,
normally please use the latest version). Run the SETUP.EXE to finish the installation.
There should be files as following (the default path is C:\EVERFINE\LT-101A_X.XX)
when installation is finished:
Controls DPS_Power DPSPowerDLL.dll
LT-101A.exe LT-101A.exe.mainifest
DrvData.dat Limit.set
6.3 Operation
1. Click the "Start" menu, point to "Program", then it will display "Program" menu;
2. Select "Everfine" menu, click"LT-101A" to enter the measurement interface of
LT-101A.
To Next Page
Loading...