LT-101A User’s Manual
Copyright © EVERFINE, Copy or spread without authorization is prohibited. 23
6.3.1 File management
a. Build a new document, eliminate the former test content and begin a new test.
Operation:
Select "File" menu, click "New" or click in the toolbar.
b. Load the saved data of LT-101A.
Operation:
Select "File" menu, click "Open" or click in the toolbar.
c. Save the test data to specified file, the default filename extension is "lt1".
Operation:
Select "File" menu, click "Save" or click in the toolbar.
d. Save the measurement data in a new file.
Operation:
Select "File" menu, click "Save as".
e. Print the report. Output the test data to the printer. The order of the report page is as
follows: comprehensive test result, steady state test result, start-up test result.
Operation:
Select "File" menu, click "Print" or click in the toolbar.
Select "File" menu, click "Print preview" or click in the toolbar to preview the
file what is to be printed.
6.3.2 Test operation
Before testing, choose constant voltage or constant current in combo box of power
supply parameters, and fill in with corresponding rated values. In "Setup" menu, users
can select communication interface and distant power supply; in "test information and
print" menu, users can set the name and type of the power, ambient conditions as well
as the present user who can set the limit value of some main parameters as well.
In test menu, users can choose the input test frequency(narrow/broad band), input test
To Next Page
Loading...