EasyManua.ls Logo

Everflo EF 1200 - Operation

Everflo EF 1200
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
must be immediately washed.
The chemical product containers must be disposed of through pre-sorted waste collection centres and
in accordance with the laws of the country where the machine in which the motor pump is integrated is
operating.
During operation, avoid the chemical products reaching buildings, homes, public and private lands, gardens,
roads, public and private water courses and places frequented by people and animals. Irrigation treatments
near the above places must be performed in the absence of wind.
CHECKING AND CONNECTING UP TO WATER MAINS
WARNING
• Also follow the instructions contained in the manual of the machine in which the motor pump is
integrated.
Follow the water mains connection instructions applicable in the country where the machine in which the
motor pump is integrated is installed.
CAUTION
Follow the water mains connection instructions shown in the
“specIFIcatIons and technIcaL data
paragraph, with special reference to the priming depth and supply pressure and temperature: in case
of any doubts, contact a Skilled Technician.
The suction of motor pump must always be equipped with a suitably-sized lter: frequently make sure
this is clean.
Never operate the motor pump without water supply.
OPERATION
WARNING
Also follow the instructions contained in the manual of the machine in which the motor pump is
integrated, with special reference to the parts relating to the safety precautions, any use of personal
protective equipment (protective goggles, ear mus, etc.) and handling.
Before starting up the machine in which the motor pump is integrated, carefully read the machine’s manual
and this manual. In particular, make sure you have fully understood how the motor pump and the machine
in which it is integrated work as regards liquid on/o operations.
The motor pump and the machine in which it is integrated are not intended to be used by people (including
children) with reduced physical, sensorial or mental capacities, or who lack the experience and expertise, unless
they are able to benet, through the intermediation of a person responsible for their safety, from supervision
or instructions concerning the use of the motor pump and of the machine in which it is integrated.
Children must be supervised to make sure they do not play with the motor pump and with the machine in
which it is integrated.
During operation:
- always keep an eye on the motor pump and the machine in which it is integrated and out of the reach of
children; in particular, be very careful when using near nurseries, clinics and old-people’s homes, in case of
children, elderly people or disabled people without supervision;
- do not direct high-pressure jets against materials containing asbestos or other substances harmful for the
health;
- do not cover the motor pump and the machine in which it is integrated and do not place them where
ventilation is prevented (remember this above all when using the machine in closed environments);
- when not in operation and before doing any jobs, perform the operations described in the
“stop
paragraph.
In particular, do not leave the motor pump and the machine in which it is integrated connected to the power
supply and release any residual pressure;
- operating pressure must never exceed the maximum value set for the motor pump (see also
“speCifiCAtions
And teChniCAl dAtA
paragraph);
WARNING. Do not use the motor pump or the machine in which it is integrated near people if these are not
wearing personal protective equipment.
EN

Related product manuals