11
BLC (Back Light Compensation) ON/OFF
When BLC is turned ON, the AGC, ES and IRIS operating points are
determined by averaging over the center area instead of the entire
field-of-view, so that a dimly-lit foreground object at center area can be
clearly distinguished from brightly-lit backgrounds.
Dip Switch Functions
BLC should not be used unless it is needed to compensate a subject with a
light behind it.
The default setting is OFF.
FL (Flickerless Function) ON/OFF
When picture flicker fiercely, turn FL on, then the camera will stabilize the
speed of electronic shutter at 1/100(PAL) or 1/120(NTSC) automatically,
and reduce the flicker immediately.
The default setting is OFF.
IRIS Level Adjustment
Brightness Level can be adjusted from the IRIS level VR.
Turn counterclockwise to L to get darker picture.
Turn clockwise to H to get brighter picture.
IRIS ALC Adjustment
To select light metering method – This settting adjusts the gain and iris level
simultaneously.
Turn the IRIS ALC Adjustment VR counterclockwise for Average
Metering.
Turn the IRIS ALC Adjustment VR clockwise for Peak Metering. Too
high of a setting will result in a noisy picture.
To Next Page
Loading...
