12
Simple Instructions for the Desiccant Pack
To prevent humidity from building inside the dome, use the desiccant pack which
absorbs humidity:
1. Adjust all settings first and place the desiccant pack on the horizontal rod,
then bend the horizontal rod and fix it.
2. Install the outer cover and tighten the screws.
Installation steps for the EHD series:
Step 1.
Desiccant pack
Horizontal rod
Step 2.
Bend the horizontal rod and fix the desiccant
Step 3.
Install the outer cover and tighten the screws
13
To Next Page
Loading...
