EverFocus EZN268 - 6.1.8 Black;White List Configuration

 EZN268
35
6.1.8 Black/WhiteList
UsethispagetospecifyIPaddressesthatareallowed/deniedtoaccessthiscamera.Bydefault,
anyIPaddresscanaccessthecamera.

Note:TheAllowedIPaddressesonlybecomerelevantwhentheDenieditemscontaina
NetworkorRange,andthesupervisorwantstoallowoneormoreIPaddresseswithinthat
excludedrangeornetwork.Insuchascenario,theuserwouldentertheexcludedrangeor
networkfortheDenieditems,andentertheexceptionsfortheAlloweditems.



 IPType:SelectIPv4orIPv6fromthedrop‐downlist.
 PermissionType:SelectDenytodenytheIPaddressesconfiguredbelowfromaccessingthe
camera.TheAllowoptionisonlyrelevantifyou’vesetupatleastoneDenyitemconfigured
withNetworkorRangenetworkrulefromtheRuledrop‐downlist.
 Rule:SelectanetworkruleandthenfillintheIPinformationinthebelowboxes.
 Single:TypeasingleIPaddressintheIPAddressfieldbelow. 
 Network:TypetheIPaddressandsubnetmaskinthefieldbelow.
 Range:TypearangefortheIPaddresses.
 IPAddressFrom:TypeanIPaddress here.
:SetuptheIPinformationandclicktheCreatebutton,thecreatedIPinformationwillbe
listedintheBlack/Whitelist.
:HighlightaniteminthelistandthenclicktheRemovebuttontoremovethehighlighted
item.
:HighlightaniteminthelistandsetuptheIPinformationintheboxesbelowthe
Black/Whitelist.ClicktheEditbuttonandtheitemwillbeedited.
:Clickthebuttontocancelthechangesandreturntotheprevioussettings.
