52
Error Codes and Recommendations for Solutions
Error codes, their probable causes and recommendations for solu-
tions are provided in the chart below.
Error Code Potential Cause for Error Solution Oer
ER03
Pressing more than one buttons at the
same time.
Turn o the cooker. Clean the touch-
screen panel and try again after turning
the stove on.
ER22
Touch buttons are not detected by the
circuit or short circuit error on the button
analysis.
Contact the manufacturer.
ER20
Flash error. Contact the manufacturer.
ER47
Communication wire is not installed incor-
rectly or mid-level card is dierent.
Contact the manufacturer.
ER2
Excessive temperature.
Restart cooking again after the hob is
cooled.
ER3
Not a suitable cooker. Please use induction-compliant cookers.
E5 / E6
Network frequency is out the permitted
frequency range.
Check the connection.
E8
Fan error. Contact the manufacturer.
E9
Temperature sensor error. Contact the manufacturer.
WARNING: The appliance may turn o to protect
itself if it is operated at the highest level for a long
time. This is a normal situation for appliance security.
To Next Page
Loading...